This robust Nylon stock sheet offers exceptional wear resistance and low friction properties. Precisely manufactured to 0.535" thickness, it provides a reliable and durable solution for critical industrial components.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.535" |
| Length | 26" |
| Width | 31" |
A high-performance industrial component, this Nylon stock sheet (0.535" thickness, 26" length, 31" width) is formulated for superior lubricity and wear resistance. Its inherent self-lubricating characteristics minimize friction and reduce the need for external lubricants, making it ideal for sliding surfaces, bearings, and wear pads in demanding environments. The material's excellent mechanical strength and chemical resistance further enhance its suitability for continuous operation under challenging conditions, ensuring extended component life and reduced maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean and free from debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to the intended application, adhering to specified torque values.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to stress fractures. | Utilize sharp, carbide-tipped tooling designed for plastics and maintain a consistent feed rate during cutting. |
| Over-tightening fasteners, causing deformation. | Employ washers and adhere to recommended torque specifications to prevent localized stress concentrations. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Self-lubricating bearings, Bushings and rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||