This robust Nylon stock sheet provides exceptional durability and low-friction surfaces, ideal for custom fabrication in demanding material handling environments. Engineered for longevity and performance.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.533" |
| Length | 40" |
| Width | 24" |
Precision-manufactured to tight tolerances, this 0.533-inch thick Nylon stock sheet measures 24 inches wide by 40 inches long. Its high-density nylon composition delivers excellent abrasion resistance, impact strength, and a low coefficient of friction, minimizing wear and tear in sliding or bearing applications. This material's inherent self-lubricating properties make it a superior choice for reducing friction and noise in material handling equipment, chutes, liners, and wear pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using mechanical fasteners or suitable industrial adhesives, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to uneven edges. | Use sharp, high-quality cutting blades designed for plastics to ensure clean, precise cuts. |
| Over-tightening fasteners, causing material stress or cracking. | Utilize washers and avoid over-tightening fasteners to allow for thermal expansion and contraction without damaging the Nylon sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides for conveyor systems, Chute liners for bulk material handling, Custom fabricated bearings and bushings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||