This robust Nylon stock sheet offers exceptional durability and low friction for efficient material handling. Its high strength and wear resistance make it ideal for demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.531" |
| Length | 44" |
| Width | 27" |
A proven choice for industrial professionals, this Nylon stock sheet delivers superior performance in material handling applications. With a substantial thickness of 0.531 inches, a width of 27 inches, and a length of 44 inches, it provides a generous surface area for fabrication. Nylon's inherent properties, including excellent tensile strength, high impact resistance, and low coefficient of friction, ensure longevity and reduced wear on mating components. This makes it an ideal material for chutes, liners, wear pads, and guides where friction and abrasion are significant concerns.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the Nylon sheet to the mounting surface using recommended fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners not designed for plastic applications, leading to stress concentration and cracking. | Utilize fasteners with wide washers or consider self-tapping screws specifically designed for use with plastics to distribute load effectively. |
| Over-tightening fasteners, which can deform the Nylon and compromise its structural integrity. | Tighten fasteners to a snug fit and avoid excessive torque. If possible, use a torque wrench set to the manufacturer's recommended specifications for Nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Chute Liners, Wear Strips and Pads, Guide Rails, Impact Plates, Conveyor Rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||