This robust Nylon Stock Sheet provides superior wear resistance and impact strength, ideal for fabrication and repair in demanding industrial environments. Its precise dimensions ensure consistent performance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.527" |
| Length | 42" |
| Width | 38" |
A high-performance industrial component, this Nylon Stock Sheet is engineered with a nominal thickness of 0.527 inches, a generous length of 42 inches, and a width of 38 inches. Fabricated from high-grade nylon, it exhibits exceptional tensile strength, excellent abrasion resistance, and good chemical inertness, making it suitable for applications requiring durability and resistance to wear and tear. Its dimensional stability under varying environmental conditions further enhances its reliability in precision tooling, wear pads, and structural components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate thoroughly to remove any debris or contaminants. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut sheet to the desired location using suitable fasteners or adhesives, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools which can lead to chipping or melting of the nylon. | Employ sharp, carbide-tipped blades designed for plastics, and consider coolant for smoother cuts. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking of the nylon. | Use washers to distribute pressure and tighten fasteners to a snug fit, avoiding excessive torque. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Custom Machined Parts, Protective Linings, Gears and Sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||