This robust Nylon Stock Sheet offers exceptional wear resistance and impact strength for demanding material handling applications. Its precise dimensions ensure reliable performance and integration into existing systems.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.522" |
| Length | 41" |
| Width | 13" |
Manufactured under strict quality controls, this Nylon Stock Sheet boasts a thickness of 0.522 inches, a length of 41 inches, and a width of 13 inches. Composed of high-grade nylon, it exhibits superior abrasion resistance, low friction coefficient, and excellent load-bearing capabilities. This material is ideal for fabricating wear strips, guide rails, impact pads, and custom components within material handling equipment, minimizing wear and extending service life.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark precise cut lines on the nylon stock sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) to achieve clean, accurate cuts. 3. Securely fasten the fabricated nylon components using appropriate mechanical fasteners, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, resulting in ragged edges and compromised structural integrity. | Employ industrial-grade cutting equipment designed for plastics, such as a band saw with a suitable blade, to ensure clean and precise cuts. |
| Over-tightening fasteners, which can cause localized stress and potential cracking of the nylon material. | Apply fasteners incrementally and ensure they are snug but not excessively tight. Consider using washers to distribute pressure over a larger area. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Plates, Guide Rails and Rollers, Impact Absorption Pads, Custom Bushings and Bearings, Chute Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||