This robust Nylon stock sheet offers exceptional toughness and wear resistance, making it ideal for demanding fabrication tasks. Its substantial thickness ensures superior performance in high-stress environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.517" |
| Length | 13" |
| Width | 29" |
A proven choice for industrial professionals, this 0.517-inch thick Nylon stock sheet (13" x 29") provides superior mechanical strength and excellent abrasion resistance. Engineered for durability, Nylon exhibits low friction, good chemical resistance, and high impact strength, making it suitable for a wide range of demanding applications including wear pads, structural components, and protective barriers. Its machinability allows for precise custom fabrication to meet exact project specifications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is adequately supported and secured using appropriate fasteners. 2. If machining, follow standard safety protocols for cutting, drilling, and shaping Nylon. 3. Verify all fabricated components are dimensionally accurate and properly integrated into the final assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating during machining, leading to melting or material degradation. | Utilize sharp tooling and maintain appropriate cutting speeds with adequate coolant to prevent excessive heat buildup. |
| Improper fastener selection for high-load applications, causing material pull-through. | Employ fasteners with a larger bearing surface or washers to distribute load effectively and prevent deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Protective Guards and Bumpers, Structural Components in Machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||