This premium Nylon stock sheet, precisely manufactured to 0.493" thickness, offers exceptional abrasion resistance and polishing capabilities. Ideal for fabricating custom components in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.493" |
| Length | 30" |
| Width | 43" |
Specified by design engineers worldwide, this Nylon stock sheet offers a nominal thickness of 0.493 inches, a standard length of 30 inches, and a width of 43 inches. Composed of high-performance nylon, it exhibits excellent wear resistance, low friction, and good impact strength, making it suitable for applications requiring controlled surface finishing, component isolation, or wear pads. Its machinability allows for precise custom fabrication, ensuring tight tolerances for critical components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the fabricated component using suitable fasteners or adhesives, ensuring proper alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that may not withstand the abrasive environment. | Employ corrosion-resistant or hardened fasteners appropriate for the intended application and operating conditions. |
| Machining at excessively high speeds without adequate cooling, leading to material degradation. | Utilize recommended cutting speeds and feeds for nylon, employing coolant or air blast to manage heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom wear pads and guides, Abrasion-resistant liners for chutes and hoppers, Polishing fixtures and carriers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||