This robust Nylon Stock Sheet offers exceptional durability and performance. Its substantial thickness and precise dimensions make it ideal for custom fabrication, protective barriers, and wear-resistant components in harsh industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.481" |
| Length | 23" |
| Width | 28" |
Designed for demanding industrial environments, this 0.481-inch thick Nylon Stock Sheet provides superior mechanical strength, excellent abrasion resistance, and good chemical inertness. Measuring 23 inches in length and 28 inches in width, its robust nylon composition ensures longevity under heavy loads and continuous operation. This material is ideal for fabricating custom jigs, fixtures, wear pads, and impact-resistant components, offering a reliable solution for applications requiring high tensile strength and dimensional stability in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark the desired cut lines on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for clean, accurate cuts. 3. Secure the cut component using standard industrial fastening methods (e.g., bolts, rivets) suitable for nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastic materials, leading to chipping or melting. | Employ specialized saw blades designed for plastics or use a router with a suitable bit for clean, precise cuts. |
| Over-tightening fasteners, which can stress the nylon and lead to cracking or deformation. | Use washers and tighten fasteners to a snug fit, allowing for slight thermal expansion and contraction of the nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Jig and Fixture Fabrication, Wear Strips and Guide Rails, Protective Shielding and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||