High-performance Nylon stock sheet engineered for superior durability in material handling. This robust sheet offers excellent wear resistance and impact strength for challenging industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.478" |
| Length | 31" |
| Width | 34" |
Specified by design engineers worldwide, this Nylon stock sheet boasts a precise thickness of 0.478 inches, a length of 31 inches, and a width of 34 inches. Crafted from high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for slides, wear pads, and custom components in conveyor systems, chutes, and impact zones. Its inherent toughness ensures longevity under heavy load conditions and continuous operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Accurately cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the installed component using recommended fasteners and techniques for the specific application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to jagged edges or material stress. | Employ sharp, specialized tools designed for cutting Nylon, such as carbide-tipped saws or routing bits. |
| Over-tightening fasteners, which can cause localized stress cracks in the Nylon. | Use appropriate torque settings and consider oversized washers to distribute the load evenly across the mounting surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Conveyor components, Chute liners, Impact plates, Custom fabricated parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||