This robust Nylon stock sheet provides superior durability and performance for critical pneumatic system components. Its precise dimensions and material properties ensure reliable operation under pressure.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.475" |
| Length | 34" |
| Width | 46" |
Precision-manufactured to tight tolerances, this 0.475-inch thick Nylon stock sheet, measuring 34 inches by 46 inches, is engineered for demanding pneumatic environments. Nylon's inherent properties of high tensile strength, excellent abrasion resistance, and good chemical compatibility make it ideal for fabricating seals, pistons, wear pads, and custom fittings within compressed air systems. Its low coefficient of friction minimizes wear and ensures smooth operation, contributing to extended component lifespan and reduced maintenance cycles in applications requiring consistent performance under moderate to high pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 2. Machine the cut material to achieve precise component geometries according to design specifications. 3. Install fabricated components into the pneumatic system, ensuring proper sealing and clearances.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using oversized or undersized components that do not meet design tolerances. | Verify all machined dimensions against engineering drawings and critical tolerances before installation. |
| Improperly cleaning the Nylon surface before mating with other components, leading to premature wear. | Ensure all surfaces are free of debris, oils, and contaminants prior to assembly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components, Seals and gaskets for air systems, Wear resistance components in automated machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||