This industrial-grade Nylon stock sheet offers exceptional wear resistance and impact strength. Its machinability and self-lubricating properties make it ideal for a wide range of demanding applications where durability is paramount.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.472" |
| Length | 46" |
| Width | 45" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a robust 0.472-inch thickness, a generous 46-inch length, and a 45-inch width. Composed of high-performance Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction. This material is well-suited for fabrication of custom components, including wear pads, bushings, gears, and tooling fixtures, requiring dimensional stability and longevity in challenging environments. Its inherent toughness ensures reliable performance under significant mechanical stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and accurately mark cut lines on the Nylon stock sheet using a scribe or marking pen. 2. Utilize a suitable saw blade (e.g., fine-tooth carbide or specialized plastic blade) for clean cuts. 3. Employ moderate feed rates and proper cooling to prevent material overheating and melting during cutting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using an incorrect saw blade, leading to chipping or melting. | Select a high-quality, fine-tooth blade specifically designed for cutting plastics to ensure a clean, precise cut. |
| Applying excessive heat during cutting, causing material deformation. | Maintain a moderate feed rate and consider using a coolant or compressed air to dissipate heat effectively. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear components and liners, Custom bushings and bearings, Machined tooling and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||