This robust Nylon Stock Sheet offers exceptional wear resistance and low coefficient of friction. Manufactured with precision, it's engineered for durability and performance in demanding industrial environments, providing a reliable material solution.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.471" |
| Length | 48" |
| Width | 16" |
Precision-manufactured to tight tolerances, this 0.471-inch thick Nylon Stock Sheet measures 16 inches in width and 48 inches in length. Constructed from high-density nylon, it exhibits superior mechanical strength, excellent abrasion resistance, and a low friction surface. Its inherent toughness and resistance to impact make it suitable for applications requiring a durable, self-lubricating material. Ideal for fabrication of custom parts, wear pads, bushings, and structural components subject to friction and stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines accurately on the nylon sheet. 2. Utilize a carbide-tipped saw blade designed for plastics for clean, precise cuts. 3. Smooth cut edges using a deburring tool or fine-grit sandpaper.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect saw blade, leading to melting or chipping. | Employ a sharp, carbide-tipped blade specifically designed for cutting plastics and ensure adequate cooling during the cutting process. |
| Applying excessive force during cutting, causing stress fractures. | Allow the saw to do the work; apply steady, moderate pressure to avoid overheating and potential damage to the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Machined Components, Wear Strips and Pads, Bushings and Bearings, Gears and Sprockets, Chute Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||