This robust Nylon stock sheet provides exceptional durability and dimensional stability. Engineered for demanding industrial applications, it offers excellent wear resistance and impact strength, making it ideal for custom fabrication.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.469" |
| Length | 13" |
| Width | 15" |
Built to exacting engineering tolerances, this 0.469" thick Nylon stock sheet measures 13" x 15". Composed of high-density polyamide, it exhibits superior tensile strength, excellent abrasion resistance, and good electrical insulating properties. The material's inherent toughness and moderate coefficient of friction make it suitable for components subjected to high stress, repeated impact, or sliding wear. Its machinability allows for precise shaping into bushings, gears, wear pads, and custom fixtures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the intended mounting surface thoroughly to remove all debris and contaminants. 2. Carefully position the Nylon stock sheet according to design specifications. 3. Secure the sheet using appropriate fasteners (e.g., screws, bolts) ensuring even pressure distribution to prevent warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without considering Nylon's thermal expansion. | Employ fasteners with appropriate clearance or use Belleville washers to accommodate thermal expansion and contraction. |
| Over-tightening fasteners, leading to material deformation. | Torque fasteners to manufacturer-recommended specifications for Nylon, avoiding excessive clamping force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Precision tooling and jigs, Wear components and bearings, Electrical insulation and housings, Custom fabrication and prototyping.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||