This premium Nylon stock sheet is engineered for superior performance in high-wear, lubricating environments. Its exceptional material properties ensure reliable operation and extended component life in demanding industrial applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.462" |
| Length | 21" |
| Width | 46" |
Specified by design engineers worldwide, this lubricating grade Nylon stock sheet offers a nominal thickness of 0.462 inches, with dimensions of 21 inches in length and 46 inches in width. Manufactured from a specially formulated Nylon composite, it exhibits excellent inherent lubricity, low coefficient of friction, and superior wear resistance. This material is ideal for components subjected to continuous motion and high loads, minimizing friction-induced heat and wear. Its robust mechanical strength and chemical inertness further enhance its suitability for diverse industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and free of debris. 2. Carefully cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Deburr all cut edges to prevent material flaking and ensure a smooth finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard Nylon where lubricity is critical. | Always select a specifically formulated lubricating grade Nylon for applications requiring low friction and wear resistance. |
| Improper edge finishing after cutting. | Thoroughly deburr all cut edges to maintain material integrity and prevent premature wear. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Slide plates and rollers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||