High-performance Nylon stock sheet engineered for demanding industrial applications. Its robust properties offer exceptional wear resistance, impact strength, and low friction for various fabrication needs.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.460" |
| Length | 21" |
| Width | 33" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a nominal thickness of 0.460 inches, a width of 33 inches, and a length of 21 inches. Composed of premium nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for fabricating components subjected to continuous wear or impact. Its machinability allows for precise customization for specialized applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, router) to achieve precise shapes. 3. Smooth edges using sandpaper or filing for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating during machining, leading to melting. | Use appropriate cutting speeds and cooling techniques (e.g., air blast, coolant) to prevent material degradation. |
| Incorrect fastening, causing stress concentrations. | Employ properly sized fasteners and consider countersinking or using washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides, Impact-resistant components, Bushings and bearings, Custom tooling fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||