This high-density Nylon stock sheet, formulated for exceptional lubricity, provides superior wear resistance and low friction for demanding mechanical components. Engineered for durability and performance.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.459" |
| Length | 41" |
| Width | 33" |
Precision-manufactured to tight tolerances, this Nylon stock sheet boasts a substantial 0.459" thickness, measuring 41" in length and 33" in width. The material's inherent self-lubricating properties, stemming from its molecular structure, significantly reduce friction and wear in dynamic applications. Its excellent tensile strength, impact resistance, and chemical inertness make it ideal for use in food processing machinery, material handling systems, and industrial bearings where reduced maintenance and extended service life are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet using corrosion-resistant fasteners, ensuring even distribution of load.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for nylon, leading to chipping or melting. | Employ sharp, high-speed steel or carbide-tipped cutting tools specifically designed for plastics. Maintain adequate cooling during the cutting process. |
| Over-tightening fasteners, causing localized stress and potential cracking of the nylon. | Use washers to distribute the load and tighten fasteners to the manufacturer's recommended torque specifications for nylon. Avoid excessive force. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Chute liners and impact plates.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||