This robust Nylon stock sheet offers exceptional strength and wear resistance. Its precise dimensions and superior material properties make it a reliable choice for demanding industrial fabrication and replacement parts.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.456" |
| Length | 36" |
| Width | 17" |
Precision-manufactured to tight tolerances, this 0.456-inch thick Nylon stock sheet measures 36 inches in length and 17 inches in width. Engineered from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and low friction, making it suitable for a wide range of mechanical components, wear pads, and structural elements where impact and continuous operation are critical. Its machinability allows for intricate part creation with minimal material degradation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Accurately mark the desired cut lines on the nylon sheet. 3. Employ appropriate sawing equipment with a sharp blade designed for plastics, maintaining a consistent feed rate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull or incorrect blade for cutting nylon. | Utilize a sharp carbide-tipped blade specifically designed for cutting plastics to prevent melting and ensure clean edges. |
| Applying excessive force or feed rate during cutting. | Maintain a moderate and consistent feed rate to avoid overheating and chipping of the nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets, Protective covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||