This high-performance lubricating nylon stock sheet is engineered for exceptional wear resistance and low friction. Its robust properties make it the ideal material for critical components in demanding industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.440" |
| Length | 17" |
| Width | 32" |
Designed for demanding industrial environments, this lubricating grade nylon stock sheet offers a superior combination of self-lubrication, excellent wear resistance, and high impact strength. With dimensions of 0.440 inches thick, 17 inches in length, and 32 inches in width, it provides ample material for fabrication of custom parts. Its inherent low coefficient of friction minimizes heat buildup and extends component life in dynamic applications. This material is ideal for producing bushings, wear pads, guide rails, and other sliding components where reduced maintenance and extended service intervals are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Precisely machine the nylon stock sheet to the required dimensions. 3. Securely install the fabricated nylon component using appropriate fastening methods, avoiding over-tightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners on nylon components, leading to deformation or cracking. | Utilize torque-controlled fasteners and appropriate washers to distribute load evenly. |
| Exposure to excessive UV radiation without proper protection, causing material degradation. | Apply UV-resistant coatings or select a UV-stabilized grade if prolonged outdoor exposure is expected. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Chute Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||