This robust Nylon stock sheet provides excellent mechanical strength, wear resistance, and chemical inertness. It's precisely manufactured for superior machinability and reliable performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.431" |
| Length | 45" |
| Width | 40" |
Manufactured under strict quality controls, this Nylon stock sheet measures 0.431 inches thick, 45 inches in length, and 40 inches in width. Engineered from high-grade Nylon (Polyamide), it exhibits a favorable balance of tensile strength, impact resistance, and low friction coefficient, making it suitable for applications requiring robust material properties and dimensional stability under varying loads and environmental conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark cutting lines on the Nylon stock sheet. 2. Utilize appropriate sawing equipment (e.g., band saw, circular saw) with sharp, carbide-tipped blades designed for plastics. 3. Ensure proper support of the material during cutting to prevent chipping or warping.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull or incorrect saw blades, leading to poor cut quality and material stress. | Employ sharp, high-quality carbide-tipped blades specifically designed for cutting Nylon or plastics. Maintain blade sharpness through regular inspection and replacement. |
| Excessive feed rate or heat build-up during cutting, causing melting or deformation of the Nylon. | Utilize a moderate feed rate and consider using a coolant or air blast to dissipate heat. Monitor cutting temperature to prevent material degradation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machined custom gears and bearings, Wear pads and guide rails, Housings and structural components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||