High-performance Nylon Stock Sheet offers superior durability for demanding material handling applications. Its robust composition ensures longevity and reliable performance in challenging industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.429" |
| Length | 13" |
| Width | 36" |
Designed for demanding industrial environments, this Nylon Stock Sheet provides exceptional wear resistance, low friction, and excellent impact strength. With a precise thickness of 0.429 inches, a length of 13 inches, and a width of 36 inches, it is ideally suited for fabricating custom components such as wear pads, guides, chutes, and impact surfaces where resistance to abrasion, chemicals, and moisture is paramount. Its inherent toughness allows it to withstand significant loads and repeated stress cycles.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface thoroughly. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the nylon component using fasteners or adhesives suitable for the specific application and substrate.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that may corrode or weaken the nylon over time. | Utilize stainless steel or specialized polymer fasteners designed for compatibility with nylon and the operating environment. |
| Over-tightening fasteners, which can cause stress concentration and premature failure of the nylon. | Apply fasteners to the recommended torque specifications, using washers to distribute load evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Chute liners, Impact pads, Fabricated custom components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||