This robust Nylon stock sheet, measuring 0.428 inches thick, 34 inches wide, and 42 inches long, provides exceptional mechanical strength and wear resistance for demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.428" |
| Length | 34" |
| Width | 42" |
A proven choice for industrial professionals, this Nylon stock sheet offers superior toughness, excellent chemical resistance, and a low coefficient of friction. With precise dimensions of 0.428" thickness, 34" width, and 42" length, it is ideal for fabricating components requiring high tensile strength and impact resistance. Its inherent lubricity makes it suitable for bearing surfaces, wear pads, and intricate machine parts where reduced friction is critical. This material also exhibits good electrical insulation properties.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Cut the nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut nylon piece using mechanical fasteners or appropriate adhesives, ensuring a stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for high-density polymers. | Utilize carbide-tipped blades or specialized routers designed for cutting plastics to prevent chipping and ensure clean edges. |
| Over-tightening fasteners, leading to stress concentration and potential cracking. | Employ washers and torque fasteners to a manufacturer-recommended specification, avoiding excessive pressure on the nylon sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Custom machine components, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||