This lubricating grade Nylon stock sheet offers exceptional wear resistance and self-lubricating properties. Its robust construction makes it ideal for demanding industrial applications requiring low friction and noise reduction.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.411" |
| Length | 18" |
| Width | 15" |
Built to exacting engineering tolerances, this Nylon stock sheet features a precise thickness of 0.411 inches, a length of 18 inches, and a width of 15 inches. Manufactured from a premium, low-friction Nylon composite, it exhibits superior abrasion resistance, high tensile strength, and excellent chemical inertness. Its inherent lubricity significantly reduces wear and tear on mating components, making it an optimal choice for bearing surfaces, wear pads, and sliding mechanisms in environments where lubrication is challenging or undesirable.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated Nylon component using mechanical fasteners or adhesives suitable for Nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to stress concentrations. | Utilize sharp, appropriate cutting tools and avoid excessive force to maintain material integrity. |
| Using standard fasteners that can gall or damage the Nylon. | Employ fasteners made of compatible materials such as stainless steel or brass, and consider using washers to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction sliding components, Wear pads and strips, Bushings and bearings in moderate load applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||