This robust Nylon stock sheet, manufactured to stringent industrial standards, provides a durable and versatile material solution for a wide array of pneumatic components and custom fabrication needs.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.393" |
| Length | 26" |
| Width | 47" |
Built to exacting engineering tolerances, this 0.393" thick Nylon stock sheet offers exceptional strength, excellent wear resistance, and good chemical compatibility, making it ideal for pneumatic systems. Its dimensions of 26" x 47" provide ample material for fabricating custom fittings, seals, wear pads, and structural components within pneumatic circuits. Nylon's inherent properties of low friction and high impact strength ensure reliable performance in dynamic applications and moderate temperature environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark cut lines on the Nylon stock sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., industrial saw, laser cutter) for precise material removal. 3. Smooth all cut edges to remove burrs and ensure a clean finish for subsequent assembly.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper blade selection, leading to excessive heat and material deformation. | Employ high-speed steel or carbide-tipped blades designed for plastic cutting, and consider lubrication or cooling to manage heat. |
| Failing to account for material expansion and contraction due to temperature fluctuations in the installation environment. | Incorporate appropriate clearance or expansion joints in the design, especially for larger components or in environments with significant temperature variation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, Wear strips and guides in pneumatic actuators, Sealing surfaces for pneumatic valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||