This robust Nylon Stock Sheet is engineered for superior performance in demanding industrial environments. Its substantial thickness and dimensions provide a versatile material solution for a wide range of fabrication and repair needs.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.386" |
| Length | 30" |
| Width | 26" |
A high-performance industrial component, this Nylon Stock Sheet is manufactured from premium-grade nylon, offering exceptional tensile strength, impact resistance, and excellent wear characteristics. With a precise thickness of 0.386 inches, a generous length of 30 inches, and a width of 26 inches, it is ideally suited for custom fabrication of wear pads, bushings, tooling components, and protective guards. The material's inherent lubricity reduces friction, making it suitable for sliding applications and minimizing wear on mating surfaces. Its chemical resistance ensures longevity in corrosive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the substrate surface thoroughly to ensure optimal adhesion or mechanical fastening. 2. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools for dense plastics. 3. Secure the cut component using mechanical fasteners (e.g., bolts, rivets) or a suitable industrial adhesive, ensuring proper torque or cure times.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for dense plastics, leading to chipping or melting. | Employ carbide-tipped blades or routers specifically designed for cutting nylon and other hard plastics, ensuring adequate cooling to prevent melting. |
| Over-tightening mechanical fasteners, which can cause stress cracking in the nylon. | Use washers to distribute load and tighten fasteners incrementally to a specified torque, avoiding excessive pressure points. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Wear Plates and Bushings, Tooling and Fixturing Components, Protective Guards and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||