This high-density Nylon stock sheet offers exceptional wear resistance and durability. Ideal for fabricating custom components, wear pads, and structural elements in demanding industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.384" |
| Length | 24" |
| Width | 45" |
Engineered for reliability and performance, this Nylon stock sheet boasts a substantial 0.384" thickness, providing superior load-bearing capacity and impact resistance. The 24" x 45" dimensions offer a versatile platform for machining complex parts. Nylon's inherent properties, including excellent tensile strength, abrasion resistance, and low coefficient of friction, make it suitable for applications requiring reduced wear and smooth operation. Its chemical resistance further enhances its utility in challenging operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely measure and mark cutting lines on the Nylon stock sheet using appropriate marking tools. 2. Utilize a suitable saw blade designed for plastic materials to achieve clean and accurate cuts. 3. Follow established machining practices for Nylon to ensure dimensional stability and desired surface finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard wood-cutting blade which can lead to melting or chipping. | Employ a high-tooth-count blade specifically designed for cutting plastics to prevent excessive heat buildup and ensure a clean edge. |
| Applying excessive feed pressure during machining, causing stress and potential cracking. | Maintain a consistent and moderate feed rate, allowing the cutting tool to effectively remove material without binding. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Custom Machined Parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||