This 0.379-inch thick Nylon stock sheet is a robust material engineered for demanding electrical and lighting applications. Its superior mechanical properties ensure reliable performance and longevity in challenging industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.379" |
| Length | 33" |
| Width | 30" |
A high-performance industrial component, this Nylon stock sheet boasts a substantial 0.379" thickness, offering exceptional mechanical strength and impact resistance vital for electrical insulation and structural support. The dimensions of 33" in length and 30" in width provide ample material for fabrication of custom components. Nylon's inherent dielectric strength, excellent wear resistance, and broad temperature tolerance make it ideal for housings, insulators, and protective barriers within electrical and lighting systems. Its non-conductive nature ensures safety and operational integrity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired cutlines on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) to achieve precise dimensions, ensuring a clean edge. 3. Secure the fabricated Nylon component in its intended electrical or lighting assembly using mechanical fasteners or adhesives, verifying proper fit and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that may lead to chipping or melting of the Nylon. | Employ sharp, specialized blades designed for plastics and maintain moderate cutting speeds to prevent excessive heat build-up. |
| Over-tightening fasteners, which can cause stress cracks in the Nylon material. | Apply fasteners with caution, using washers to distribute load and avoiding excessive torque. Consider pre-drilling holes to the appropriate diameter. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical Insulators, Protective Housings for Lighting Fixtures, Custom Fabricated Components for Electrical Enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||