This robust 0.376-inch thick Nylon stock sheet offers exceptional wear resistance and impact strength. Its precise dimensions (46" x 16") make it ideal for custom-engineered components and demanding industrial applications.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.376" |
| Length | 46" |
| Width | 16" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits superior mechanical properties crucial for engineering applications. Its 0.376" thickness provides substantial rigidity and load-bearing capacity, while the 46" x 16" dimensions offer ample material for fabrication. Nylon's inherent characteristics include excellent abrasion resistance, good tensile strength, and a low coefficient of friction, making it suitable for gears, bearings, and wear pads. Its chemical resistance further enhances its utility in various industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clearly define the required component dimensions and tolerances. 2. Utilize appropriate sawing or cutting equipment designed for plastics, ensuring a clean, precise cut. 3. Machine or finish the cut edges as per design specifications, adhering to recommended cutting speeds and feeds to prevent material degradation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard wood-cutting tools, leading to chipping or melting. | Employ specialized cutting tools with appropriate tooth geometry and cooling methods for plastics. |
| Applying excessive heat during cutting, causing deformation. | Maintain optimal cutting speeds and utilize coolant or compressed air to dissipate heat effectively. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom machined gears and sprockets, Wear strips and guide rails, Impact-resistant components and housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||