This premium Nylon stock sheet offers exceptional mechanical strength and wear resistance. Precisely manufactured to 0.376-inch thickness, it provides a robust material solution for demanding industrial fabrication and component creation.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.376" |
| Length | 45" |
| Width | 21" |
Specified by design engineers worldwide, this 0.376-inch thick Nylon stock sheet boasts a 45-inch length and 21-inch width. Engineered for superior tensile strength, high impact resistance, and excellent abrasion characteristics, it performs reliably under significant mechanical stress and frequent use. The material's low coefficient of friction and inherent lubricity make it an ideal choice for wear pads, bushings, and other components requiring smooth operation and longevity in harsh environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure cutting tools are sharp and appropriate for machining nylon. 2. Securely clamp the stock sheet to a stable cutting surface. 3. Carefully guide the cutting tool along the desired dimensions, maintaining consistent pressure and speed.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using dull cutting tools, leading to chipping or melting. | Employ high-speed steel or carbide-tipped saw blades specifically designed for plastics and polymers. |
| Overheating the material during cutting, causing deformation. | Utilize a moderate cutting speed and consider a coolant or air blast to dissipate heat. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Machine guards and components, Wear strips and guide rails, Custom tooling and fixtures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||