A robust Nylon stock sheet engineered for demanding industrial fabricating. This material offers exceptional mechanical properties, making it suitable for a wide range of custom-engineered parts and components.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.372" |
| Length | 40" |
| Width | 37" |
A high-performance industrial component, this Nylon stock sheet exhibits a nominal thickness of 0.372 inches, with standard dimensions of 40 inches in length and 37 inches in width. Manufactured from high-grade Nylon, it provides excellent tensile strength, abrasion resistance, and impact toughness, enabling its use in high-stress environments. Its inherent lubricity and chemical resistance further enhance its suitability for applications involving friction and exposure to various substances. This sheet material is ideal for machining into gears, bearings, wear pads, and custom fixtures where durability is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired component dimensions on the Nylon stock sheet. 2. Utilize appropriate machining techniques (e.g., sawing, milling, turning) to fabricate the component to precise specifications. 3. Deburr all edges to ensure smooth operation and prevent premature wear.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or poor edge quality. | Employ specialized cutting tools with appropriate rake angles and speeds designed for machining Nylon to achieve clean cuts and avoid thermal degradation. |
| Overheating the material during machining operations, causing deformation or reduced mechanical properties. | Ensure adequate cooling during machining through the use of cutting fluids or air blasts to dissipate heat and maintain material integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Custom Gears and Sprockets, Impact Absorbers and Bumpers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||