This robust Nylon stock sheet is engineered to meet the rigorous demands of pneumatic systems. Its exceptional strength and durability ensure long-lasting performance in critical applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.371" |
| Length | 42" |
| Width | 40" |
Engineered for reliability and performance, this 0.371-inch thick Nylon stock sheet offers superior abrasion resistance, excellent tensile strength, and good impact toughness, making it ideal for the dynamic stresses encountered in pneumatic components. Its inherent lubricity reduces friction, contributing to efficient system operation and extended component life. Manufactured to precise dimensions of 42 inches in length and 40 inches in width, it provides ample material for custom fabrication of seals, wear pads, and other critical parts within pneumatic assemblies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and cut the Nylon stock sheet to the required component dimensions using appropriate cutting tools. 2. Carefully deburr all edges to ensure a smooth finish and prevent premature wear or damage to mating components. 3. Install the fabricated Nylon component into the pneumatic system, ensuring proper alignment and fitment as per system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to rough edges and material chipping. | Utilize sharp, carbide-tipped cutting tools specifically designed for machining plastics to achieve clean, precise cuts and smooth edges. |
| Over-tightening fasteners when securing Nylon components, causing material deformation or cracking. | Apply appropriate torque values when fastening Nylon components. Consider using washers or larger contact areas to distribute load and avoid localized stress. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder wear bands, Seal carrier components, Piston guide rings, Air valve internal parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||