This high-performance Nylon stock sheet offers exceptional durability and wear resistance for demanding material handling applications. Its robust composition ensures long service life in industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.362" |
| Length | 24" |
| Width | 40" |
Built to exacting engineering tolerances, this 0.362" thick Nylon stock sheet measures 24" in width and 40" in length. Composed of high-grade Nylon 6/6, it exhibits superior tensile strength, excellent impact resistance, and a low coefficient of friction, making it ideal for applications requiring smooth movement and reduced wear. Its inherent chemical resistance further enhances its suitability for diverse operational conditions, ensuring reliable performance in challenging settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to ensure adhesion and prevent debris entrapment. 2. Precisely mark and drill mounting holes according to design specifications. 3. Securely fasten the Nylon stock sheet using appropriate industrial-grade fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using undersized fasteners that can lead to tearing or delamination. | Always use fasteners of sufficient size and load-bearing capacity, designed for industrial applications. |
| Over-tightening fasteners, which can crush the Nylon and compromise its structural integrity. | Tighten fasteners to the recommended torque specifications for Nylon, ensuring a snug but not excessive fit. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guide rails, Impact pads and bumpers, Chute liners and slide surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||