This robust Nylon stock sheet is engineered for demanding pneumatic systems. Its superior wear resistance and impact strength ensure longevity and reliable operation in challenging industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.355" |
| Length | 41" |
| Width | 19" |
Engineered for reliability and performance, this 0.355" thick Nylon stock sheet offers exceptional mechanical strength and dimensional stability. Its excellent abrasion resistance and low coefficient of friction make it ideal for components subject to high wear and dynamic loads within pneumatic systems. The material's inherent toughness and good chemical resistance further contribute to its suitability for a wide range of industrial applications, ensuring consistent performance and extended service life under operational stress.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Machine or form the component to precise specifications, ensuring tight tolerances. 3. Install the finished component into the pneumatic system, verifying proper fit and function.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to uneven edges or material damage. | Utilize sharp, high-speed cutting tools specifically designed for machining plastics like Nylon to ensure clean and precise cuts. |
| Exceeding recommended machining speeds or feed rates, causing overheating and material degradation. | Adhere to manufacturer-recommended machining parameters for Nylon to prevent thermal damage and maintain material integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Seals and gaskets, Bushings and bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||