This robust Nylon Stock Sheet is engineered for demanding material handling applications. Its exceptional strength, wear resistance, and low coefficient of friction ensure reliable performance and extended service life in challenging industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.354" |
| Length | 25" |
| Width | 26" |
A high-performance industrial component, this Nylon Stock Sheet boasts a substantial 0.354-inch thickness, providing exceptional structural integrity and impact resistance. Manufactured from high-grade nylon, it exhibits superior tensile strength, excellent abrasion resistance, and a low coefficient of friction, minimizing wear and tear on mating components. The generous dimensions of 25 inches in length and 26 inches in width offer ample material for custom fabrication of wear pads, guides, rollers, and other critical elements within material handling systems. Its inherent chemical resistance further enhances its suitability for diverse operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Prepare the mounting surfaces, ensuring they are clean, dry, and free of debris. 3. Secure the fabricated nylon component using suitable fasteners, ensuring a snug and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, specialized saw blades or routing bits designed for cutting hard plastics to ensure clean, precise cuts. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking of the nylon. | Apply fasteners gradually and ensure they are snug but not overly tight. Consider using washers to distribute pressure evenly. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Bushings, Chute Liners, Conveyor Rollers, Guide Rails.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||