This premium lubricating grade nylon stock sheet provides exceptional wear resistance and a low coefficient of friction. Its robust composition makes it ideal for components subjected to high stress and continuous motion in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.341" |
| Length | 44" |
| Width | 35" |
Built to exacting engineering tolerances, this 0.341-inch thick nylon stock sheet measures 44 inches in length and 35 inches in width. Formulated with specific additives, it exhibits superior self-lubricating properties, reducing friction and wear compared to standard nylon. Key material properties include excellent tensile strength, high impact resistance, and good chemical stability, making it suitable for demanding applications such as wear pads, bushings, gears, and sliding components where minimal lubrication is desired and longevity is critical.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component to the intended assembly, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to stress concentrations. | Utilize sharp, carbide-tipped cutting tools and employ slow, steady feed rates to prevent overheating and internal stresses. |
| Over-tightening fasteners, causing deformation. | Employ calibrated torque wrenches and distribute fastening points evenly to avoid excessive localized pressure on the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Gears and Sprockets, Chute Liners, Conveyor Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||