This lubricating grade Nylon stock sheet offers exceptional wear resistance and low coefficient of friction. Its robust dimensions make it suitable for fabricating durable, self-lubricating components in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.341" |
| Length | 35" |
| Width | 29" |
Built to exacting engineering tolerances, this 0.341-inch thick Nylon stock sheet provides a 35-inch length and 29-inch width. Engineered with inherent lubricity, it minimizes friction and wear, making it ideal for components in sliding mechanisms, bearings, and wear pads. Its high tensile strength and impact resistance ensure longevity in continuous operation. The material's thermal stability further enhances performance across a range of operating temperatures, reducing the need for external lubrication and simplifying maintenance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the fabricated component to the intended application using suitable mechanical fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to rough edges or material stress. | Utilize sharp, carbide-tipped tooling designed for cutting plastics to achieve clean, precise edges and prevent stress concentration. |
| Over-tightening fasteners, which can cause deformation or cracking of the Nylon. | Employ washers and tighten fasteners incrementally to the recommended torque specifications for Nylon to avoid localized stress. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Low-friction sliding components, Self-lubricating bearings and bushings, Wear strips and guide rails.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||