This 0.338-inch thick Nylon stock sheet offers exceptional wear resistance and self-lubricating properties. Its robust construction and dimensional stability make it ideal for demanding industrial applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.338" |
| Length | 14" |
| Width | 45" |
Built to exacting engineering tolerances, this 0.338-inch thick Nylon stock sheet measures 14 inches in width and 45 inches in length. Composed of high-density Nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction, making it suitable for components subjected to continuous movement and abrasive conditions. Its inherent lubricity reduces wear and operational noise in dynamic systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surface is clean, dry, and free from debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate tooling. 3. Securely fasten the cut Nylon component using recommended mechanical fasteners, ensuring uniform pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard Nylon for high-load, high-friction applications. | Specify a lubricating grade Nylon or a composite material for improved performance and longevity. |
| Inadequate support for large sheet sections, leading to sagging or deformation. | Provide sufficient support or consider thicker material for unsupported spans. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Slide mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||