This lubricating grade Nylon stock sheet provides superior wear resistance and self-lubricating properties. Its robust nature makes it ideal for demanding industrial applications requiring reduced friction and extended component life.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.325" |
| Length | 17" |
| Width | 19" |
A high-performance industrial component, this Nylon stock sheet boasts a nominal thickness of 0.325 inches, with a standard sheet size of 17 inches in length and 19 inches in width. Engineered for exceptional wear resistance and low coefficient of friction, this material is inherently self-lubricating, reducing the need for external greasing in dynamic applications. Its excellent tensile strength and impact resistance ensure durability under moderate loads and operational stresses. The material composition is specifically formulated to minimize abrasion and galling, making it a preferred choice for components in conveying systems, bearings, and wear pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools designed for plastics. 2. Deburr all cut edges thoroughly to prevent premature wear or damage to mating components. 3. Securely fasten the fabricated Nylon part using appropriate hardware, ensuring proper alignment to minimize stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to melting or chipping. | Utilize carbide-tipped saw blades or routers specifically designed for cutting Nylon to ensure clean, precise cuts. |
| Improper edge finishing, leaving sharp or rough edges that can cause premature wear. | Employ a deburring tool or fine-grit sandpaper to create smooth, radiused edges on all cut surfaces. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Low-friction bearings and bushings, Gears and sprockets in low-load environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||