This industrial-grade Nylon stock sheet offers exceptional durability and wear resistance. Ideal for custom fabrication and prototyping in demanding environments requiring robust material properties.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.318" |
| Length | 16" |
| Width | 36" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.318 inches thick, 16 inches wide, and 36 inches in length. Composed of high-performance nylon, it exhibits excellent tensile strength, impact resistance, and a low coefficient of friction. Its inherent lubricity and resistance to abrasion make it suitable for wear strips, guides, and custom tooling components where dimensional stability under load is critical. The material's chemical resistance also allows for use in moderately corrosive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and quality of the stock sheet. 2. Machine to required specifications using appropriate tooling for nylon. 3. Deburr edges and inspect for any surface imperfections after machining.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Machining nylon at excessive speeds leading to melting or tool wear. | Utilize recommended machining speeds and feeds for nylon, employing sharp tooling and adequate cooling. |
| Assuming nylon is impervious to all chemicals. | Consult chemical resistance charts specific to nylon for the intended application to ensure compatibility. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Jig and Fixture Components, Wear Strips and Bushings, Prototyping and Tooling Inserts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||