This 0.318-inch thick Nylon stock sheet provides exceptional dielectric strength and mechanical integrity, making it ideal for demanding electrical and lighting components requiring robust insulation and structural support.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.318" |
| Length | 39" |
| Width | 22" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a substantial 0.318" thickness, measuring 39" in length and 22" in width. Nylon's inherent properties, including excellent electrical insulation, high tensile strength, good abrasion resistance, and thermal stability, ensure reliable performance in challenging electrical and lighting environments. Its machinability allows for precise fabrication of custom parts, while its non-conductive nature mitigates electrical discharge risks.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the Nylon stock sheet is clean and free of contaminants. 2. Cut the sheet to the required dimensions using appropriate cutting tools for plastics. 3. Secure the fabricated component using suitable fasteners or adhesives, ensuring proper grounding if applicable to the system design.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using inadequate cutting tools, leading to chipping or melting. | Employ sharp, specialized tools for plastic cutting, such as carbide-tipped blades or laser cutters, to achieve clean edges. |
| Over-tightening fasteners, which can cause stress cracking in the Nylon. | Use washers and avoid excessive torque when securing components. Allow for slight thermal expansion and contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Electrical insulation barriers and enclosures, Lighting fixture components and diffusers, Custom fabricated electrical connectors and housings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||