This 0.315" thick Nylon stock sheet, measuring 21" x 27", is engineered for demanding pneumatic applications. Its superior strength and wear resistance ensure reliable performance in harsh industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.315" |
| Length | 21" |
| Width | 27" |
Trusted by engineers across multiple sectors, this Nylon stock sheet offers exceptional mechanical strength, abrasion resistance, and a low coefficient of friction, making it ideal for pneumatic components. The 0.315" thickness provides substantial structural integrity for bearings, seals, and wear pads within pneumatic systems. Its inherent toughness and resistance to moisture absorption contribute to long-term dimensional stability and performance reliability in diverse operating conditions, from moderate temperatures to elevated pressures.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate cutting tools for nylon. 2. Machine edges and surfaces to final specifications for precise fitting. 3. Install fabricated components into pneumatic assemblies, ensuring proper clearances and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to delamination or chipping. | Utilize sharp carbide-tipped blades or specialized plastic-cutting saws for clean and precise cuts. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Employ torque-limiting tools and consider using washers to distribute load evenly across the surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Pneumatic cylinder components (e.g., wear bands, guide rings), Seals and gaskets for pneumatic actuators, Bushings and bearings in pneumatic machinery.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||