This premium Nylon stock sheet provides exceptional strength and wear resistance, ideal for fabricating custom components in demanding pneumatic systems. Its robust nature ensures long-term performance and reliability.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.311" |
| Length | 18" |
| Width | 36" |
Manufactured under strict quality controls, this 0.311-inch thick Nylon stock sheet offers a substantial 18-inch by 36-inch surface area for precision machining. Nylon's inherent properties, including high tensile strength, excellent abrasion resistance, and good chemical inertness, make it the material of choice for wear pads, guide blocks, seals, and custom fittings in pneumatic applications. Its machinability allows for intricate designs and tight tolerances, ensuring optimal performance in fluid power systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to required dimensions using appropriate cutting tools. 2. Machine to final component specifications, adhering to material cutting guidelines. 3. Install fabricated component into pneumatic system, ensuring proper sealing and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners in Nylon components, leading to stress cracking. | Apply torque to Nylon components following manufacturer specifications or industry best practices for plastics. |
| Using incompatible lubricants or solvents that degrade Nylon. | Consult chemical compatibility charts for Nylon before exposing it to any fluids or cleaning agents. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom pneumatic cylinder components, Wear strips and guides for pneumatic actuators, Seals and gaskets for pneumatic manifolds.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||