This high-quality, lubricating grade nylon stock sheet offers excellent wear resistance and self-lubricating properties. Its robust dimensions provide ample material for custom fabrication and demanding industrial uses.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.292" |
| Length | 45" |
| Width | 25" |
Manufactured under strict quality controls, this lubricating grade nylon stock sheet boasts a nominal thickness of 0.292 inches, a length of 45 inches, and a width of 25 inches. Composed of a specialized nylon formulation incorporating internal lubricants, it exhibits a low coefficient of friction, superior abrasion resistance, and good impact strength. These inherent properties make it ideal for components subjected to sliding contact and moderate load-bearing applications where minimal lubrication is desired.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to desired dimensions using appropriate cutting tools. 2. Machine or form the component according to design specifications, ensuring proper tolerances. 3. Install the fabricated part into its intended application, verifying smooth operation and fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard nylon for high-wear, low-friction applications. | Utilize this specifically formulated lubricating grade nylon for optimal performance and longevity in such scenarios. |
| Improper machining leading to excessive heat buildup. | Employ sharp tooling and adequate cooling during machining to prevent thermal degradation of the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Chute liners and slides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||