Engineered for superior performance, this 0.286-inch thick Nylon stock sheet offers exceptional strength, wear resistance, and impact absorption. Ideal for fabricating robust components in demanding industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.286" |
| Length | 42" |
| Width | 12" |
Built to exacting engineering tolerances, this 0.286-inch thick Nylon stock sheet measures 42 inches in length and 12 inches in width. Composed of high-grade Nylon, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it suitable for wear pads, machine guards, and structural components. Its inherent toughness provides superior impact resistance, ensuring longevity in high-stress operational settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to ensure optimal adhesion or fastening. 2. Cut the nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Secure the sheet using mechanical fasteners (bolts, screws) or industrial-grade adhesives, ensuring a stable and flush fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard plastic cutting tools which can lead to chipping or uneven edges. | Employ carbide-tipped blades or specialized routing bits designed for hard plastics to achieve clean, precise cuts. |
| Over-tightening mechanical fasteners, which can cause stress concentration and potential cracking. | Use washers and tighten fasteners only until snug, allowing for minor thermal expansion and contraction without inducing undue stress. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Pads, Machine Guards and Covers, Chute and Liner Material, Custom Bushings and Bearings, Impact Absorbers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||