This premium Nylon Stock Sheet offers exceptional durability and abrasion resistance. Its precise dimensions and robust material properties make it ideal for demanding industrial abrading and polishing tasks, ensuring consistent results.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.286" |
| Length | 23" |
| Width | 38" |
Engineered for reliability and performance, this Nylon Stock Sheet features a substantial thickness of 0.286 inches, a generous length of 23 inches, and a width of 38 inches. Manufactured from high-grade nylon, it exhibits excellent wear resistance, a low coefficient of friction, and good impact strength, making it suitable for a wide range of abrasive and polishing operations. Its dimensional stability ensures consistent performance under stress and varying environmental conditions, contributing to extended service life in critical applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the substrate thoroughly to remove all contaminants. 2. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the sheet to the substrate using industrial-grade adhesives or mechanical fasteners, ensuring a flush and stable fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during cutting, leading to material chipping or delamination. | Employ sharp, high-quality cutting tools specifically designed for plastics and ensure a steady, controlled cutting speed. |
| Inadequate substrate preparation, resulting in poor adhesion or premature failure. | Ensure the surface is free of grease, oil, dust, and moisture before applying adhesive or fasteners. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Abrasive backing pads, Polishing media, Wear strips and guides, Protective surfacing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||