This high-performance Nylon stock sheet offers exceptional durability for rigorous material handling applications. Its robust properties ensure longevity and reliability in challenging industrial settings.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.274" |
| Length | 16" |
| Width | 19" |
Designed for demanding industrial environments, this 0.274-inch thick Nylon stock sheet measures 16 inches in length and 19 inches in width. Engineered for superior wear resistance, excellent impact strength, and low friction, it is ideal for applications requiring load-bearing capabilities and resistance to abrasion. The inherent properties of Nylon make it resistant to chemicals and moisture, ensuring consistent performance even in harsh conditions. This makes it a prime choice for fabrication of custom components, wear strips, guides, and impact pads.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free from debris. 2. Precisely mark and cut the Nylon sheet to the required dimensions using appropriate cutting tools. 3. Secure the installed Nylon component using suitable fasteners or adhesives, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge chipping or cracking. | Utilize sharp, carbide-tipped blades designed for plastic cutting to achieve clean, precise edges. |
| Inadequate fastener selection or placement causing stress concentration. | Employ appropriately sized fasteners with washers to distribute load evenly and prevent over-tightening. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Custom fabricated components, Impact pads and bumpers, Chute liners, Bearing surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||