This robust Nylon stock sheet offers exceptional durability and impact resistance. Precisely manufactured, it's ready for demanding fabrication tasks where strength and wear are paramount.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.267" |
| Length | 19" |
| Width | 22" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits excellent tensile strength, abrasion resistance, and low coefficient of friction, making it suitable for high-wear environments. The sheet measures 0.267 inches in thickness, 19 inches in length, and 22 inches in width, conforming to industry standards for fabricating grade materials. Its inherent properties allow for precise machining and a wide range of applications in mechanical components and protective elements.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from contaminants. 2. Accurately measure and cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using suitable fasteners or adhesives, ensuring even distribution of stress.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to delamination or chipping. | Utilize sharp, high-speed steel or carbide-tipped cutting tools specifically designed for plastics to achieve clean cuts. |
| Overheating during machining, causing material degradation. | Employ adequate cooling methods, such as flood coolant or air blast, and maintain appropriate cutting speeds and feed rates to prevent heat buildup. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Gears and sprockets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||