This premium Nylon stock sheet is engineered for superior performance in demanding industrial environments. Its inherent self-lubricating properties minimize friction and wear, extending component life.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.263" |
| Length | 39" |
| Width | 38" |
A high-performance industrial component, this Nylon stock sheet (0.263" thickness, 39" length, 38" width) is manufactured from a specialized lubricating grade of Nylon. This material exhibits exceptional wear resistance, low coefficient of friction, and good impact strength, making it ideal for applications requiring reduced operational friction and prolonged service life. Its dimensional stability and resistance to chemicals further enhance its suitability for rigorous operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mating surfaces thoroughly to remove any debris or contaminants. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut piece using suitable fasteners, ensuring proper alignment with the intended application.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard Nylon for high-friction applications. | Select the lubricating grade Nylon stock sheet to ensure optimal performance and longevity in high-friction environments. |
| Inadequate surface preparation before installation. | Always ensure mating surfaces are clean and free of contaminants to prevent premature wear and ensure proper adhesion or fit. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear strips and guides, Bushings and bearings, Low-friction sliding surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||