This robust 0.258" thick Nylon stock sheet, measuring 48" x 42", is engineered for demanding industrial applications requiring superior strength and wear resistance. Its dimensional stability makes it ideal for custom fabrication.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.258" |
| Length | 48" |
| Width | 42" |
Specified by design engineers worldwide, this Nylon stock sheet provides exceptional mechanical properties including high tensile strength, excellent impact resistance, and superior abrasion wear. With precise dimensions of 0.258 inches (6.55 mm) thickness, 48 inches (1219 mm) length, and 42 inches (1067 mm) width, it is manufactured from high-grade Nylon 6/6 (polyamide 6/6) to ensure consistent performance in critical applications. Its low coefficient of friction and resistance to chemicals make it suitable for dynamic components and protective surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Accurately measure and mark cut lines using a sharp scribe or marking tool. 3. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) for precise sizing, maintaining cooling if necessary to prevent material degradation. 4. Smooth cut edges with a deburring tool or fine-grit sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades which can cause chipping or melting. | Employ industrial-grade saw blades designed for plastic cutting, ensuring a fine tooth pitch and adequate coolant if required. |
| Applying excessive heat during cutting, leading to material deformation. | Maintain moderate cutting speeds and employ cooling methods (air or liquid) to dissipate heat and preserve material integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Tooling and Fixtures, Wear Strips and Bushings, Gears and Sprockets, Prototyping and Custom Fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||