High-performance Nylon stock sheet engineered for resilience. This robust material provides superior wear, abrasion, and impact resistance, ideal for demanding industrial environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.247" |
| Length | 47" |
| Width | 39" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits exceptional mechanical properties. With a nominal thickness of 0.247 inches, a generous length of 47 inches, and a width of 39 inches, it offers substantial material for fabrication. Its inherent strength, excellent impact absorption, and good chemical resistance make it suitable for a wide array of industrial applications requiring durable and reliable components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the sheet using recommended fasteners or adhesives, ensuring proper alignment and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting technique leading to material stress or cracking. | Utilize sharp, carbide-tipped cutting tools designed for plastics and maintain a consistent feed rate to prevent overheating and chipping. |
| Over-tightening fasteners, causing localized stress and potential failure. | Employ washers and torque fasteners to the manufacturer's recommended specifications, avoiding excessive compression of the Nylon sheet. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Protective Liners, Chute Linings, Custom Machined Parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||