This high-performance Nylon stock sheet provides exceptional durability and low friction for demanding material handling applications. Its robust construction ensures long service life and efficient operation in industrial environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.236" |
| Length | 18" |
| Width | 34" |
Trusted by engineers across multiple sectors, this 0.236" thick Nylon stock sheet, measuring 18" x 34", offers superior tensile strength, excellent abrasion resistance, and a low coefficient of friction. Its inherent chemical resistance makes it suitable for corrosive environments. Ideal for wear strips, chute liners, and impact plates in conveyor systems, hoppers, and manufacturing equipment, minimizing wear and reducing product damage.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly to remove all debris and grease. 2. Position the Nylon stock sheet precisely according to the design specifications. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Inadequate surface preparation leading to poor adhesion or uneven mounting. | Always ensure the mounting surface is perfectly clean and free of contaminants before installation. |
| Over-tightening fasteners, which can cause localized stress and potential cracking of the Nylon sheet. | Use appropriate torque settings and washers to distribute fastener load evenly across the sheet surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Chute Liners, Wear Strips, Impact Plates, Conveyor Components, Bearing Surfaces.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||